PurePower! Filter Cleaning Instructions

While there are specific instructions for each type of PurePower! filter, the cleaning process is basically the same for each filter:

  1. Remove and disassemble the filter
  2. Visually inspect each component of the filter
  3. Remove any metallic particles from the magnets
  4. Rinse all the components in PurePower!'s ECO-Shower or, if not available, hot, soapy water
  5. Be sure to rinse the filter element from the inside out
  6. Dry all components with compressed air, blow air from inside out.
  7. Visually inspect each component for cleanliness
  8. Reassemble. If you have an oil filter, use clean motor oil on threads during reassembly.

Printable, detailed cleaning instructions can be downloaded here, and full care instructions can be found below.

Cleaning and Installation Instructions